Test Methods
- Visual Inspection
- Shock
- Vibration
- Temperature Cycling
- Seal
- Solderability
- Thermal Shock
- Steady State Life
- Ambient Pressure
- Constant Acceleration
- Destructive Bond Pull
- Salt Spray
- ... and Many More
SCREENING TESTS AND QUALITY CONFORMANCE FOR ALL MIL-PRF-55310 PRODUCTS
Q-Tech offers a full range of possible tests and inspections performed in-house or at an approved test laboratory. Please provide us with your specific test and inspection requirements. The sortable database below provides detailed documentation of our various testing protocols.
Test Methods
| Test Procedure | MIL-Spec | Method | Comments | Testing | Document |
|---|---|---|---|---|---|
| Ambient Pressure | MIL-STD-883 | 1001 | In-House | View | |
| Ambient Pressure | MIL-STD-202 | 105 | In-House | View | |
| Constant Acceleration | MIL-STD-883 | 2001 | 5,000g to 10,000g | In-House | View |
| Destructive Bond Pull | MIL-STD-883 | 2011 | In-House | View | |
| Die Shear Strength | MIL-STD-883 | 2019 | In-House | View | |
| Internal Water Vapor Content | MIL-STD-883 | 1018 | Out-of-House | View | |
| Lead Integrity & Terminal Strength | MIL-STD-883 | 2004 | In-House | View | |
| Lead Integrity & Terminal Strength | MIL-STD-202 | 211 | In-House | View | |
| Moisture Resistance | MIL-STD-202 | 106 | Out-of-House | View | |
| Moisture Resistance | MIL-STD-883 | 1004 | Out-of-House | View | |
| Non-Destructive Bond Pull | MIL-STD-883 | 2023 | In-House | View | |
| Particle Impact Noise Detection (PIND) | MIL-STD-202 | 217 | In-House | View | |
| Particle Impact Noise Detection (PIND) | MIL-STD-883 | 2020 | In-House | View | |
| Physical Dimensions | MIL-STD-883 | 2016 | In-House | View | |
| Radiographic Inspection | MIL-STD-202 | 209 | Out-of-House | View | |
| Radiographic Inspection | MIL-STD-883 | 2012 | Out-of-House | View | |
| Random Vibration | MIL-STD-202 | 214 | Out-of-House | View | |
| Random Vibration | MIL-STD-883 | 2026 | Out-of-House | View | |
| Resistance to Soldering Heat | MIL-STD-202 | 210 | Up to 260°C | In-House | View |
| Resistance to Solvents | MIL-STD-883 | 2015 | In-House | View | |
| Resistance to Solvents | MIL-STD-202 | 215 | In-House | View | |
| Salt Spray | MIL-STD-202 | 101 | Up to 48 hours | Out-of-House | View |
| Salt Spray | MIL-STD-883 | 1009 | Out-of-House | View | |
| Scanning Electronic Microscope | MIL-STD-883 | 2018 | Out-of-House | View | |
| Seal: Fine and Gross Leak | MIL-STD-202 | 112 | In-House | View | |
| Seal: Fine and Gross Leak | MIL-STD-883 | 1014.13 | A1 and C | In-House | View |
| Seal: Fine and Gross Leak | MIL-STD-883 | 1014 | A1, A2, or B and B2 or B3 | Out-of-House | |
| Shock (Specified Pulse) | MIL-STD-883 | 2002 | Up to 3,000g peak | Out-of-House | View |
| Shock (Specified Pulse) | MIL-STD-202 | 213 | Out-of-House | View | |
| Solderability | MIL-STD-202 | 208 | In-House | View | |
| Solderability | MIL-STD-883 | 2003 | In-House | View | |
| Stabilization Bake | MIL-STD-883 | 1008 | In-House | View | |
| Steady State Life | MIL-STD-883 | 1005 | Tested for 1,000 hours at 125°C typical | In-House | View |
| Temperature Cycling | MIL-STD-883 | 1010 | Over the temperature range -65°C to +200°C | In-House | View |
| Thermal Shock | MIL-STD-883 | 1011 | Over the temperature range -65°C to +200°C | In-House | View |
| Vibration (Sinusoidal) | MIL-STD-202 | 204 | Out-of-House | View | |
| Vibration (Sinusoidal) | MIL-STD-883 | 2007 | Sweep from 10Hz to 2,000Hz with 20g peak to peak, or 30 Gs peak to peak | Out-of-House | View |
| Visual Inspection | MIL-STD-883 | 2009 | In-House | View | |
| Visual Inspection | MIL-STD-883 | 2014 | In-House | View | |
| Visual Inspection | MIL-STD-883 | 2017 | In-House | View | |
| Visual Inspection | MIL-STD-883 | 2010 | In-House | View | |
| Visual Inspection | MIL-STD-883 | 2032 | In-House | View |