Q-Tech’s QT725S low noise Voltage Controlled SAW Oscillators provide superior performance at operating frequencies from 400 MHz to 1.3GHz. QT725S delivers low phase noise; -105dBc/Hz at 1 kHz offset and –165 dBc/Hz noise floor. Typical vibration sensitivity is 1ppb/g. The QT725S VCSO is a Class 2 hybrid per MIL-PRF-55310, hermetically sealed, and operated from –40°C to +85°C. Absolute Pull range (APR) is ±20ppm min.
Screening and QCI is offered with a choice from the two most common standards: MIL-PRF-38534, Class K (modified) or MIL-PRF-55310, Level S.